Skip to content

Low Flow Electronic Pressure Regulator

HighFlowRegulator_Med_trans
$449.00



Select your specifications above to create a part number

Features

  • Vacuum Pressure Control Available
  • Optimized For Low Volume Outlet Flow
  • Electronic Performance Feedback
  • Quiet Operation
  • Dual Proportional Valve Design
  • Excellent Resolution and Repeatability
Lead Time

1‐4 Units5-10 Business Days
5 Units or MoreConsult Sales

We offer discounts for orders of 25 units or more. Please contact our sales department for a quote. 

Kelly Pneumatics, Inc. offers a reduced cost, single or dual-valve design, Electronic Precision Pressure Regulator with I/P transducer control circuitry. Designed specifically for low volume flow rates, this regulator precisely controls both positive and negative outlet pressure ranges, even during dynamic changes in outlet flow rates. By utilizing either an externally supplied dynamic/static input signal or an on-board adjustable set-point value, the Low Flow Precision Regulator provides exceptional closed-loop, proportional, output pressure control characteristics.

Our regulators offer significant improvements over traditional dual on/off valve electronic regulators. Utilizing our patented proportional valve design for both internal fill and dump valves gives a smooth and accurate output pressure, as opposed to dual on/off valve designs that cause substantial shock waves in the regulated pressure signal. The KPI regulator can replace manual regulators, needle valves, and bleed valves or bleed orifice discreet component systems.

Specifications

Output Pressure Range -14.7 to 100 PSI (standard)
0 to 300 psig (custom)
Pressure Accuracy +/- 1% or less (Full Span)
Linearity +/- 1% or less (Full Span)
Response Time less than 150 milliseconds
(as low as 50 ms)
Max Flow Rate 6 slpm / .25 scfm @ 100psi
Connections 1/8″ FPT, 1/4″ FPT, 5/32″ OD Tube Fittings or #10-32 Female Ports
Weight 1.0 lb
Power Required 12 or 24 VDC (Wire Leads); 110 VAC (Turnkey)
Current Required 90 mA to 180 mA
Control Signal 0-5 volts, 0-10 volts or 4-20 mA
Feedback Signal 0-5 or 0-10 volts
Manual Control Adjustable Potentiometer
Operating Temp. 32-150 °F or 0-65 °C
Filtration 40 Micron Recommended
Wetted Materials Cold rolled stainless steel w/ electroless
nickel plating, brass and 304 stainless steel.

Wiring Details

WiringDiagram2

* Omitted for Turn-Key Power Supply option

Terminal Number1*234
Lead Wire ColorBrown WhiteBlue Black
FunctionPower Supply VoltageControl SignalGroundFeedback Signal

Dimensions

HFRDims
LFRDims

Performance Characteristics

LowFlowRegulatorCurve2

More From This Product Line

Max Flow Rate:500 LPM
Output Pressure: -14.5 to 300 PSI

Max Flow Rate:10 LPM
Output Pressure: -14.5 to 300 PSI

Max Flow Rate:500 LPM
Output Pressure: 1 to 300 PSI

Not Sure Which Regulator You Need? Please Tell Us About Your Application. We'll Help You Select the Perfect Regulator For Your Project.

Purchasing Information

After completing your order, you will receive an email confirmation, as well as a shipment tracking number when your order has shipped.

Payment: We accept PayPal Account payments and most major credit cards. Phone orders are also accepted.

Refund Policy: Give it a try! We offer a 30-Day refund period for all orders. If you ship back the order and confirm your return is in transit within 30 Days of receiving the order, we will refund the cost of units ordered. This refund does not include parts that are damaged by you or missing components. All shipping costs are non-refundable unless the package was incorrectly shipped or you received defective products.

Cancellations: You can cancel your order for a full refund If your order hasn’t shipped. Contact us and submit your order number to request a cancellation.

0
Your Cart